金羽牌人体静电消除器是- -种适用于易燃、易爆和防静电场所的人体静电释放产品。该产品能够将人体本身所积累的静电电荷安全泄放,避免因人体静电而引发的火灾爆炸事故和人体电击现象的发生。它采用一种无源式电路,利用人体上的静电使电路工作,最终达到消除静电的目的。

Rentong brand human electrostatic eliminator is a kind of static releasing product applied to flammabie,explosive and anti-static places,capable of safely releasing the static charges accumulated in human body,avoiding fire,esplosion and electric shock accidents caused by static. It adopts passive circuit and utilizes the statics on human bodies to make the circuit work,so as to eliminate the static.

性能特点

产品外观美观大方、体积小、重量轻、不需电源、安装使用方便。

产品采用无源式电路设计、消除静电时人体无异样感。

使用性能稳定可靠,能在-50~ 100°C正常运行。

注:表中来列规格可根据客户要求定制

产品工作原理及组成

1.工作原理

目前，部分易燃、易爆危险场所仍采用金属导体直接接地放电的方式来消除人体静电,此方式虽能消除人体静电，但是,此方式采用导体间放电的形式释放静电电荷,释放电阻小,静电释放时间短,瞬间释放能量大,从而导致人体电击或引发火防爆触摸球灾爆炸事故的可能性和必然性。

防爆人体静电释放器弥补'了目前人体静电导除方式的不足.合提示牌理的人体静电释放电阻，延长人体静电释放时间，降低了人体静电瞬间释放能量，有效规避了火灾爆炸事故的发生立杆和人体被电击的现象。

2.产品组成

1. Principle of operation, at present, some inflammable and explosive dangerous places still use the method of direct ground discharge of metal conductors to eliminate human static electricity. This method can eliminate human static electricity, but, in this way, the electrostatic charge is released in the form of electric discharge between conductors,the releasing resistance is small, the releasing time of electrostatic discharge is short, and the instantaneous releasing energy is large,which leads to the possibility and inevitability of electric shock or fire of human body and explosion accident of explosion-proof touch ball. The explosion- proof human electrostatic releaser makes up for the deficiency of the current mode of human electrostatic conductivity removal. The combination of the resistance of human electrostatic release and the principle of prompt prompt action can prolong the time of human electrostatic release and reduce the energy of human electrostatic instantaneous release, the utility model can effectively avoid the occurrence of fire and explosion accidents, the phenomenon that the Vertical Pole and the human body are shocked.

2. Product composition

产品安装注意事项

用户请勿自行更改该产品的零部件,应会同产品制造商共同解决运行中出现的故障。以杜绝损坏现象的发生。

产品的安装、使用和维护应遵守产品说明书、GB3836.13-2010爆炸性环境;爆炸性气体环境用的电气设备的检修、GB3836.15-2010爆炸性环境第15部分:危险场所电气安装(煤矿除外)、GB3836.16-2010 爆炸性环境第16部分: 电气装置的检查和维护(煤矿除外)及GB50257-1996“电气装置安装工程爆炸和火灾危险环境电气装置施工及验收规范"的有关规定。

产品无法正常工作时,需更换防爆触摸球。

Please do not change the parts of the product by yourself. You should work with the manufacturer to solve the problems in operation. To prevent damage.

Product installation, use and maintenance should comply with the product instructions, GB3836.13-2010 explosive environment; Inspection and repair of electrical equipment used in explosive gas environment, GB3836.15-2010 explosive environment part 15: electrical installation at hazardous sites (except coal mines) ，GB3836.16-2010 explosive environment part 16: Inspection and maintenance of electrical installations (except coal mines) and relevant provisions of Gb50257-1996 "Code for explosion and fire hazard environment, construction and acceptance of electrical installations".

Product can not work properly, the need to replace the explosion-proof touch ball.